How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning or hacking. It prevents the engine from running until a PIN code is entered. This can be as long as 20 characters.
This additional layer of security is not detectable by thieves who might not expect it. Certain systems have an app which allows the owner to disable their immobiliser if they forget their PIN or utilize the service/valet mode.
Connecting ghost immobiliser tracker to the vehicle's
The Ghost 2 Immobiliser is a cutting-edge security system that can be incorporated into your vehicle's ECU, providing a discreet security line against thieves. It is extremely efficient and user-friendly, making it a valuable addition to your vehicle's security arsenal. But, as with any other anti-theft device, it is not 100% reliable and requires regular maintenance to ensure optimal operation. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network), a robust serial networking that allows microcontrollers to communicate with each over short distances. A central control unit is not required. It is designed to allow multiplexing of electrical wiring inside vehicles to save on copper and has a number of advantages, including low costs and easy use.
In modern vehicles in modern vehicles, the CAN protocol is used to communicate with a variety of systems, such as the engine management system (EMS), transmission controller, steering module as well as air conditioning controls and many more. It also carries sensor information like speed sensors, as well as other inputs, to control the vehicle's various features. The CAN bus is used to monitor these various components, and prevent the car from starting if they are in danger of failure.
While the CAN bus could be used for a variety of reasons, it's essential to understand how it works and how it's secured. The CAN bus is an excellent method to enhance the features of your vehicle, but it's vital to secure it from hackers and other threats. Installing a firewall, and monitoring your CAN bus with software is the best way to do this.
Ghost2's control unit is hidden in the dashboard or wiring harness, which prevents thieves from physically tampering with it. It is also impossible to reset a PIN code or an emergency code without having access to the car.
You can enable Transport Mode if you need to give your vehicle away for valet parking, service or any other reason. This feature turns off both the keyfob and ignition functions of the Ghost immobiliser. It will only reactivate after the car has reached 31 mph over a period of 15 minutes.
How do you create a PIN code
The Ghost immobiliser shields your vehicle from thieves. The patented technology makes use of the PIN to shut down the engine of the vehicle and stop it starting without the correct code, or a valid fob/mobile. The system's subtle design is unnoticeable and also provides unbeatable protection against theft. The system is TASSA-verified and can save you significant sums on your car insurance.
During the installation when you install the Ghost system enters an learning mode that records the sequence of buttons that are pressed to create your unique pin code. The installer will guide you through activating the system after the pin code has been created. Once activated the Ghost system shuts down your vehicle's starting motor unless you enter a valid PIN or switch the vehicle to transport mode. This makes it very difficult for thieves to duplicate or hack into your vehicle's start system.
Installing a Ghost immobiliser is easy however it is essential to follow the detailed instructions in the user's manual to ensure proper operation. Hand tools and multimeters can be used to verify electrical values. Insulation tape, heat shrink tubing, and cable ties can be used to shield wires from damage. Test the system on regular basis to identify any potential issues.
It is crucial to check the system one final time prior to turning on the ignition. Ghost immobilisers are able to rearm themselves after 3 to 30 second, depending on the model of your vehicle. The system is also equipped with a Service/Valet Mode that lets you temporarily remove the system for servicing or valet parking.
The immobiliser should be hidden in a hidden location beneath the dashboard or steering wheel. Make use of a small piece of tape or paint on the wires of the CAN H and CAN L to make them easier to find during testing. Additionally the CAN H and CAN L wires must be connected to a source of power that has constant 12V. It is crucial to verify the connections again after testing, as an the incorrect identification of these wires may cause system malfunction.
The system must be activated
A ghost immobiliser stops the car from starting unless you press certain buttons on the vehicle, typically on the steering wheel or door panel, or the central console. The sequence can be altered by the user at any time. Once the system is activated, it is in no way able to be removed by thieves and is a great option for anyone who wishes to safeguard their vehicle from theft.
The system is designed to be undetectable, meaning it can't be detected by modern diagnostics or code-grabbing technology. It also doesn't send out radio frequencies, which makes it even difficult for thieves to identify the device.
If the device is discovered, it will stop the engine from running. It will also sound an alarm to scare the burglar away. The device can be used to monitor the location of the car, which can help police track it down when it is stolen.
Contact Car Specalist Customs for a estimate or to discuss your options if you're interested in a Ghost immobiliser. We are fully qualified to install a ghost immobiliser on your vehicle and will make sure it is concealed in a hard-to-reach area. We can also provide other security measures, such as an ignition lock for your wheel and a kill switch to help protect your vehicle from thieves.
Disarming the system
It is essential to know how to disarm a Ghost immobiliser if fitted to your car. This will aid you in the case that you lock your keys inside the car or when your battery fails. The system utilizes a unique PIN code that only you know. It will not start the vehicle without this code. Pressing a combination buttons on the steering wheel or on the dashboard is the most efficient method to enter your code. This is a much easier method than using the key fob and it also keeps anyone from copying your remote.
Ghost2 is not intrusive unlike other immobilisers from the aftermarket which require cutting wires for installation. It also works with the CAN bus system of your vehicle to operate. Its main feature is its ability to bypass the engine without impacting your vehicle's normal functions, making it difficult for thieves to use signal boosters to duplicate your car key. It does not emit radio frequency, therefore thieves cannot detect it.
The Ghost system also features the Transport Mode which allows you to temporarily disable the security system in occasions like transportation or servicing. This feature is an excellent option if you have to lend your vehicle to someone without sharing the PIN code or when you want to ensure your vehicle is secure while driving it. To activate the Transport Mode, press the service button five times within 2 seconds. The Ghost system will confirm activation by giving five indication signals.
After you're done, make sure to save the emergency code in a secure place away from your vehicle. If you ever find yourself locked out of your car you can contact the technician or company who installed the system and they will give you the code. If you are unable to get in touch with them, you can call an authorized dealer. However, this may involve verification procedures, and you may be charged for additional fees.
Aside from the convenience of this system, you can also depend on it to safeguard your vehicle from theft and reduce insurance costs. Many insurance companies offer reduced monthly premiums or even financial incentives for installing this anti-theft technology.
